Administrators
|
Administrator authorization failed
|
Sent on error of administrator authorization in the Control Center. The reason of authorization failure is given in the notification text.
|
|
Unknown administrator
|
Sent on attempt of authorization in the Control Center by administrator with unknown login.
|
|
Installations
|
Installation on station failed
|
Sent if an error occurred during the Agent installation on a station. The error reason is given in the notification text.
|
|
Installation on station successfully completed
|
Sent on succeeded Agent installation on a station.
|
|
Licenses
|
License key expiration
|
Sent if the Agent key has already expired.
|
|
Licenses donation has expired
|
Sent if the period of licenses donation to neighbor Servers from the license key of this Server has expired.
|
The period of licenses donation to neighbor Servers is specified in the Administration → Dr.Web Server configuration → Licenses section.
|
Limitation on donated licenses is reached
|
Sent if the number of requested licenses for donation to a neighbor Servers exceeds the number of licenses that are available in the license key.
|
|
Limitation on online stations is reached
|
Sent if during connection of a station to the Server, it was detected that the number of stations in the group into which the connected station is included, reached the limitation in the license key assigned for this group.
|
|
Limitation on stations in the group is approaching
|
Sent if the number of stations in the group is closing to the license limitation in the key assigned to this group.
|
The number of available licenses left in the key to send the notification is: less than three licenses or less than 5% from the total number of licenses in the key.
|
Limitation on stations in the group is exceeded
|
Sent if during the Server startup, it was detected that the number of stations in a group already exceeded the number of licenses in the license key assigned to this group.
|
|
Newbies
|
Station automatically rejected
|
Sent if a new station requested a connection to the Server and has been rejected by the Server automatically.
|
The situation may occur if in the Administration → Dr.Web Server configuration → General section, for the Newbies registration mode option, the Always deny access value is set.
|
Station is waiting for approval
|
Sent if a new station requested a connection to the Server and administrator must approve or reject the station manually.
|
The situation may occur if in the Administration → Dr.Web Server configuration → General section, for the Newbies registration mode option, the Approve access manually value is set.
|
Station rejected by administrator
|
Sent if a new station requested a connection to the Server and has been rejected by administrator manually.
|
The situation may occur if in the Administration → Dr.Web Server configuration → General section, for the Newbies registration mode option, the Approve access manually value is set and an administrator selected the Anti-virus Network →  Unapproved stations →  Reject selected stations option for this station.
|
Other
|
Epidemic in the network
|
Sent if an epidemic detected in the anti-virus network. It means that during specified time period, it was detected more than specified number of threats in the network.
|
To be able to sent epidemic notifications, you must set the Track epidemic flag in the Administration → Dr.Web Server configuration → General section. Parameters on epidemic detection are set in the same section.
|
Neighbor server has not connected for a long time
|
Sent according to the task in the Server schedule. Contains information that the neighbor Server has not connected to this Server for a long time. The date of last connection is given in the notification text.
|
The time period during which the neighbor Server should not get connected to send the notification, is set in the Neighbor server has not connected for a long time task of the Server schedule configured in the Administration → Dr.Web Server Task Schedule.
|
Server log rotation error
|
Sent if an error occurred during rotation of the Server operation log. The reason of log rotation error is given in the notification text.
|
|
Server log write error
|
Sent when an error occurred during writing an information into the Server operation log. The reason of log write error is given in the notification text.
|
|
Statistic report
|
Sent after generation of periodic report according to the task in the Server schedule. Also, notification contains the path to download the report file.
|
The report is generated according to the Statistic reports task in the Server schedule configured in the Administration → Dr.Web Server Task Schedule.
|
Repository
|
Not enough free space on disk
|
Sent if on a disk where the Server var folder located, is running out of space.
|
Low disk space defined if it is less than 315 MB or less than 1000 nodes (for UNIX system based OS) left, if this values do not redefined by environment variables.
|
Repository product cannot be updated
|
Sent if during update of a repository product from the GUS, an error has occurred. The name of the product and the reason of update error are given in the notification text.
|
|
Repository product is up-to-date
|
Sent if during repository updates check, it was detected that requested product is up-to-date. At this, update of this product from the GUS is not required.
|
|
Repository product is updated
|
Sent when repository update from the GUS successfully completed.
|
|
Update of repository product is frozen
|
Sent if the repository product was frozen by administrator. At this, update of this product from the GUS is not performed.
|
You can manage repository products including their frozen and unfrozen states in the Administration → Detailed repository configuration section.
|
Update of repository product is started
|
Sent if during repository updates check, it was detected that for requested products an update required. At this, the update from the GUS is launched.
|
|
Stations
|
Cannot create the station account
|
Sent if a new stations account cannot be created on the Server. Error details are given in the Server log file.
|
|
Connection terminated abnormally
|
Sent on abnormal termination of a connection with a client (station, Agent installer, neighbor Server).
|
|
Critical error of station update
|
Sent if a notification received from a station reports an error during update of anti-virus components from the Server.
|
|
Scan error
|
Sent if a notification received from a station reports an error during scanning.
|
|
Scan statistics
|
Sent if a notification received from a station reports a scan completion. Administrative notification also contains brief scan statistic.
|
|
Security threat detected
|
Sent if a notification received from a station reports the threats detection. Administrative notification also contains detailed information on detected threats.
|
|
Station already logged in
|
Send on attempt to connect to the Server by a station with identifier which matches the identifier of a station already connected to the Server.
|
|
Station approved by administrator
|
Sent if a new station requested a connection to the Server and has been approved by administrator manually.
|
The situation may occur if in the Administration → Dr.Web Server configuration → General section, for the Newbies registration mode option, the Approve access manually value is set and an administrator selected the Anti-virus Network → Unapproved stations →  Approve selected stations and set a primary group option for this station.
|
Station authorization failed
|
Sent if a station provided incorrect credentials when trying to connect to the Server. Further actions that depend on a stations approval policy, are also given in the notification.
|
Stations approval policy is set in the Newbies registration mode option of the Administration → Dr.Web Server configuration → General section.
|
Station automatically approved
|
Sent if a new station requested a connection to the Server and has been approved by the Server automatically.
|
The situation may occur if in the Administration → Dr.Web Server configuration → General section, for the Newbies registration mode option, the Approve access automatically value is set.
|
Station has not connected to the Server for a long time
|
Sent according to the task in the Server schedule. Contains information that the station has not connected to this Server for a long time. The date of last connection is given in the notification text.
|
The time period during which the station should not get connected to send the notification, is set in the Station has not connected for a long time task of the Server schedule configured in the Administration → Dr.Web Server Task Schedule.
|
Station reboot required
|
Sent if a notification received from a station reports that the product has been updated and the station restart is required.
|
|
Unknown station
|
Sent if a new station requested a connection to the Server, but was not allowed to review for approval or rejection of the registration.
|
|
