|
Principle of the installation:
1.The browser (Dr.Web Browser-Plugin module) connects to the ADMIN$ resource at the remote station (\\<remote_station>\ADMIN$) and copies installer files (drwinst.exe, drwcsd.pub), specified in the Dr.Web Control Center to the \\<remote_station>\ADMIN$\Temp folder. 2.The plug-in runs drwinst.exe file at the remote station with the switches according to the Dr.Web Control Center settings. Successful installation requires that at the station from which the installation will be performed:
1.The ADMIN$ resource must be available at the remote station. The availability can be checked in the following way:
In the address line of the Windows Explorer application, enter the following:
\\<remote_station>\ADMIN$
You will get the prompt for entering login and password for assess to this resource. Enter the account data, which have been specified on the installation page.
The ADMIN$ resource can be unavailable for the following reasons:
a)account does not have administrative rights; b)the station is powered off or firewall blocks assess to the 455 port; c)limitations of remote assess to the ADMIN$ resource at the Windows Vista and later OS, if the station is outside a domain. 2.The drwinst.exe and drwcsd.pub files are available. At the Dr.Web Control Center, the external information (step and error code), which can help to diagnose the error reason, is displayed.
The list of the most frequently errors
Step
|
Error Code
|
Reason
|
Validating user inputs of the remote stations (1)
|
No such host is known (11001).
|
DNS name to address conversion failed. No such DNS name or wrong name server settings.
|
Checking if NetBIOS on the remote station is available (2)
|
A socket operation failed because the destination host was down (10064).
|
445 port is not available at the remote station. Possible reasons:
◆station is shut down; ◆firewall blocks specified port; ◆the OS at the remote station is different from the Windows OS. |
Connecting to an administrative resource ADMIN$ on the remote station (1001)
|
At this step, connection with the ADMIN$ administrative resource at the remote station is performed.
|
|
The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you (1265).
|
◆Sharing and security model for local accounts is not configured. ◆Authorization server is not available (domain controller). |
Logon failure: unknown user name or bad password (1326).
|
Unknown user name or bad password.
|
The filename, directory name, or volume label syntax is incorrect (123).
|
The ADMIN$ resource does not exist at the remote station.
|
Checking installer exit code (1009)
|
At this step, result of installation is checked.
|
|
Unknown error (2).
|
Ask for the technical support of the Doctor Web company.
|
Installation is not required on this computer (4).
|
The Agent is already installed or has been incorrectly deleted (in this case, use the drwebremover utility) at this station.
|
Protocol violation (6).
|
The drwinst.exe installer is not matched with the Server version. Make sure, that the installer is from the Server installation package.
|
Cannot initialize scripting engine (7).
|
System error. Ask for the technical support of the Doctor Web company.
|
Connection to server timed out (8).
|
The Enterprise Server is not available from the remote station.
|
System should be rebooted to finish previous deinstallation (9).
|
Restart the station to complete previously uninstallation.
|
|